What is LokSound select?

What is LokSound select?

The LokSound Select is a versatile DCC & DC. “Dual Mode” decoder integrating a full-featured, 8 channel sound system, six lighting outputs and a 1.1A motor controller.

Who makes LokSound decoders?

ESU – Electronic Solutions Ulm GmbH & Co. KG: LokSound 5 / LokSound 5 DCC.

How do I reset my LokSound decoder?

LokSound decoders do not require a program track booster. Interrupt power for 5 seconds to complete the reset cycle.

What is a decoder buddy?

Decoder Buddy makes connecting your 21-Pin decoder to your HO Scale locomotive super-easy. Now a 21-pin-friendly board replaces the standard DCC 8-pin loco motherboard and easily allows you to take full advantage of all the functions and features of the latest, feature-rich decoders.

How do I reset my decoder to factory settings?

Press the blue “DStv button” on your remote control. Then use the right arrow on the remote control to go to “Settings“. Use the down arrow to go to “System Settings“. Scroll down using the down arrow to select “Reset To Factory Default” then press “OK” on your remote control.

What are DCC CV’s?

Configuration Variables or CVs are memory addresses within a decoder. They are the means for controlling the performance of a DCC decoder. The decoder’s software creates and maintains these addresses.

How do I fix no communication from primary decoder?

THE FIX FOR ERROR E143-4

1. Re check cable from the primary decoder – Check / try restarting your decoder.
2. Check extra view port settings in the decoder settings.
3. Check if heart beat is being received in the primary decoder settings.
4. check and see if the pairing of the decoders is the same, to work on triple and extra view.

How do I reset my DStv decoder to factory settings without remote?

Process of how to reset DStv decoder without remote First, unplug the power button from your decoder and ensure it is completely turned off. You can check for this by ensuring all its lights are turned off, and none is blinking. Turn it back on and press the reset button on your decoder.

What is the Loksound select decoder?

The LokSound Select allows you to adjust the sound in a way that suits your preferences. In particular, the LokSound Select decoder allows you to select from up to 4 prime mover sounds stored in the flash memory, to select between 15 air horns and between 2 bells. Your selection of Prime Mover sound, air horn and bell is stored in CV 48.

How do I program the Loksound decoder CVS?

The LokSound decoder CVs can be programmed on a standard program track. OPS mode programming will also allow you to change CVs on the fly. The decoder has a good assortment of special lighting functions that can be programmed. LEDs can be used in place of low voltage lamps.

What are the different types of Lok Sound decoders?

1 Loksound V4.0 decoders divided into the Micro, Standard, L & XL models. 2 Loksound Select decoders divided into the Micro, Standard, and L models. 3 LokPilot Standard & V4.0 line of motor decoders ESU Loksound Select Direct.

Why does the Loksound decoder use 4 ohm speakers?

The LokSound decoder is designed to use 4 ohm speakers instead of the 8 ohm speakers. No capacitor is used between the decoder and the speaker. Using a higher impedance speaker, less current is needed to drive the speaker.