Should I use E1000E or VMXNET3?

The best practice from VMware is to use the VMXNET3 Virtual NIC unless there is a specific driver or compatibility reason where it cannot be used. In many cases, however, the E1000 has been installed, since it is the default. The E1000 virtual NIC is a software emulation of a 1 GB network card.

Does VMware support Virtio?

In KVM, the supported paravirtualized interface is virtio. For VMware, VMXNET3 is supported….Product and Release Support.

Consideration Paravirtualization Technique PCI Passthrough Technique
Interfaces virtio (for KVM), VMXNET3 (for VMware) SR-IOV

How do I change from E1000E to VMXNET3?

Select Edit Settings for the virtual appliance. On the Virtual Hardware tab, expand Network Adapter and verify that VMXNET 3 is the adapter that is selected. If the adapter is not VMXNET 3, select the E1000 adapter and click Remove. Click Add > Network Adapter and for Type, select VMXNET 3.

What is E1000 driver?

The Linux* e1000e driver supports the Intel® PRO/1000 PCI-E (82563/6/7, 82571/2/3/4/7/8/9, or 82583) I217/I218/I219 based gigabit network adapters. For information concerning driver configuration details, refer to the Read Me file in the Download Center. Overview. The Linux* base drivers support the 2.4. x and 2.6.

How do I change my network adapter from E1000 to VMXNET3?

What is E1000 adapter?

E1000E is the default adapter for Windows 8 and Windows Server 2012. E1000. Emulated version of the Intel 82545EM Gigabit Ethernet NIC, with drivers available in most newer guest operating systems, including Windows XP and later and Linux versions 2.4. 19 and later.

How do I add a VMXNET3 adapter to VMWare workstation?

In order to switch your Virtual Appliance from the previous adapter to use the VMXNET3, follow these steps:

  1. Power off your Virtual Appliance in the VMWare Console.
  2. Right click the Virtual Appliance, go to Settings.
  3. Select Network Adapter 1 and click Remove.
  4. Click Add and choose Network Adapter.
  5. Choose VMXNET3 under type.

How do I change my Network Adapter in VMWare?

Procedure

  1. Open the virtual machine settings in VMware Remote Console. On Windows, select VMRC > Manage > Virtual Machine Settings. On Linux, select Virtual Machine > Virtual Machine Settings.
  2. Open the Hardware tab and click Add.
  3. Select Network Adapter and click Finish.

What is Ixgbe driver?

The ixgbe 10 Gigabit Ethernet driver is a multi-threaded, loadable, clonable, GLD-based STREAMS driver supporting the Data Link Provider Interface, dlpi(7P), on Intel 10–Gigabit PCI Express Ethernet controllers.