Can Hue light strips be cut?
Providing that you cut along the marked cut lines only, LED strips — including certain Hue lightstrips — will work after cutting. Many people experience issues with their light strips if they cut outside of these lines. The cut lines are also the safest place to cut LED strips, as the circuits here are closed.
Where do I cut hue Lightstrip?
Connect a 6-Pin to Cut-End Connector to the first cut lightstrip. On your Philips Hue Lightstrip you will find a scissors mark which is next to the six silver soldered connection points. Do not cut where the scissors mark is or you will not be able to reconnect your lightstrips!
Can you reuse cut LED strips?
A: If the LED light strip you purchased can be cut, the remaining part that you have cut off cannot be used anymore. If you want to reconnect them after cutting, you must use an additional 4 pin connector to reconnect.
Can you bend Philips Hue Strip?
The Philips Hue Lightstrip Plus is a new connected lighting solution that’s more versatile than most. That’s because it has a flexible design, which allows it to be shaped, bent, cut and extended up to 10 meters.
Can you cut LED strip lights anywhere?
You can, but we wouldn’t recommend it. By cutting an LED strip light anywhere other than the designated cutting point, you run the risk of damaging the components on the strip itself, as well as the circuit board. This may ultimately result in the strip light not working.
How do you cut and join LED strip lights?
Part 1. How to Cut LED Strip Lights
- Measure the length.
- Look for the scissors logo on the light strip.
- Cut with a pair of scissors.
- Buy a suitable 4Pin connector.
- Open the connector.
- Place the light strip into the connector.
- Cover the connector.
- Make sure the wall is dry and clean.
How do you shorten LED strip lights?
When cutting LED Strip Light it is very important to cut only on the given cut line between the copper dots. Cutting through or before the copper dots will result in no electrical conductivity to the following section. Use a pair of sharp scissors to cut the LED Strip Light directly down the given cut line.
What happens if you cut a LED strip?
LED strips are made up of several individual circuits, so each cut line demarcates the end of one circuit and the start of a new one. Cutting elsewhere on the LED strip will cause that circuit, and potentially the whole strip, to cease working.
How do you shorten LED string lights?
The best way to shorten lights wired in series is to remove an entire series section of lights by cutting lights apart where there are only has two wires, with the lights unplugged. Then, simply cap each of the two cut wires with a wire connector.
Why do LED lights stop working when cut?
https://www.youtube.com/watch?v=IREY56H9MJU