How do I reset my D-Link DCS 2630l?
4 Reset Button Press and hold this button for 10 seconds to reset the camera back to the factory default settings. Use as a camera stand or a mounting bracket. This D-Link device can connect to your wireless network from anywhere within the operating range of your wireless network.
Why won’t my D-Link camera connect?
Issue: Step 1: Check the LED on your mydlink camera and ensure that it is GREEN. Step 3: Ensure that any firewalls you may have installed are configured to allow UDP connections. If you are unsure, temporarily disable any firewalls during the setup.
How do I connect my D-Link camera to my phone?
Your camera can now be set up directly from the mydlink Lite mobile app. This app allows you to easily set up your camera directly from your phone or tablet. Scan the QR code with your iOS or Android device. Launch the mydlink Lite app and tap New users, sign up here to start the setup process.
What is the default password for Dlink camera?
The default username is admin and there is no password. If you do not remember your camera’s password, click – How do I recover my mydlink camera’s admin password? Note: In order to find the IP address of your camera, you MUST be connected to the same network as your camera.
How do I connect my D-Link camera to Wi-Fi without WPS?
How do I connect IP camera without WPS?
- Place the camera next to your router and connect it to the router with the included network cable.
- After some seconds a connection LED on the camera switches to green, which indicates that the camera is connected to the network.
Can I use D-Link camera without Wi-Fi?
D-Link Wi-Fi Cameras are not just security cameras that can be accessed through Wi-Fi or 3G/4G but also can also be viewed live without Internet access using local connect.
How do I factory reset my D Link?
Push and hold a paperclip in the reset hole for 5 seconds, thenrelease it. The camera should be back to factory default settings.
What is my Dlink camera IP address?
Open a web browser and enter the IP address “192.168. 0.1” to access your device’s web interface. Follow the instructions to set up the router and at the end you will be prompted to sign up for a D-Link account. Or, you can click on “mydlink Settings” under the “Setup” page.
Can I use Dlink camera without WIFI?