How do I print a test page on my Canon printer?

Select Start on the Windows task bar, and then select Printers and Faxes. Right-click on the corresponding printer driver icon. Select Properties from the pop-up menu. Select the Print Test Page button.

How do I test my Canon printer head?

Solution

  1. Make sure that the power is turned on and a sheet of A4 or Letter-sized plain paper are loaded in the Rear Tray. Set the Paper Thickness Lever to the left.
  2. Open the printer properties dialog box.
  3. Print the nozzle check pattern. (1) Click the Maintenance tab.
  4. Examine the pattern.

How do I reset my Canon iP7250 printer?

Restoring Network Settings to Factory Default Press and hold the [RESUME/CANCEL ] button until the POWER lamp flashes 9 times. 2. Release the [RESUME/CANCEL ] button.

How can I test my printer to print a test paper?

Touch or click Devices and Printers (Control panel). Touch and hold or right-click your printer….

  1. Click on the Windows Start Button.
  2. Select Control Panel.
  3. Select Devices and Printers.
  4. Right click on the printer and select Printer Properties.
  5. Click Print a Test Page.
  6. After the Test Page has printed click OK.

How do I print a diagnostics page?

Printing a diagnostic page from the printer control panel

  1. Make sure there is unused, plain, white paper loaded in the input tray.
  2. On the product control panel, press and hold the Power button ( ) and the Cancel button ( ) at the same time.
  3. Release both buttons. The diagnostic page prints.

How can I test my Canon printer without a computer?

Load a sheet of A4 or Letter-sized plain paper in the rear tray. Pull out the paper output tray and the output tray extension. Hold down the Stop button until the Alarm lamp flashes once, then release it immediately. The nozzle check pattern will be printed.