How do you use Bondall Silasec?
- Preparation. Clean surface thoroughly to remove contaminants. Do not attempt to waterproof an unsound surface.
- Application. For use as a Cement Paint. By volume, mix 1 part Silasec : 5 parts water : 7 parts fresh GP Portland cement.
- Drying. Apply a minimum of three coats at 24-hour intervals.
What is Silasec?
Bondall Silasec is a concentrated liquid waterproofing compound designed to be used with Portland type A or type GP ce- ments to form a permanent waterproof barrier on masonry and concrete structures and floors.
What is Bondall?
Bondall Silasec is a concentrated liquid waterproofing compound designed to be used with Portland type GP cement. Bondall HydroCrete is a water-resistant bonding and sealing agent that provides outstanding resistance.
Does BondCrete waterproof concrete?
No, BondCrete is not a waterproofing product and will re-emulsify when it comes into contact with water.
Can you mix BondCrete with cement?
BondCrete 1 : Water 10 is an ideal ratio as an admix to cement toppings, plaster concrete etc. 2 Litres of BondCrete diluted with 20 Litres of water is normally sufficient for mixing each 40 kg bag of cement.
Can I use BondCrete to seal concrete?
For exterior use, apply bondall paving & concrete sealer. bondcrete as an admix: bondcrete 1 part water 10 parts is an ideal admix ratio for cement toppings, concrete, plasters etc. For estimating purposes 2 litres of bondcrete diluted with 20 litres of water is normally sufficient for mixing each 40 kg bag of cement.
How do you use Hydrocrete?
Use Hydrocrete as admixture (1 part Hydrocrete: 1 part water) in the topping/patching mixture in place of normal water. BOND COAT FOR USE OVER GLASS GLAZED TILES, STEEL OR DENSE CONCRETE: Apply a brush coat of (1 part Hydrocrete: 1 part cement) by volume. Allow the coating to dry.
How do you use Bondall 1l BondCrete cement additive?
Apply a bondcoat of diluted BONDCRETE (BONDCRETE 1: WATER 1). While the bondcoat is wet or tacky carry out patching or topping. Mix (CLEAN SAND 2 OR 3: CEMENT 1) mixed to a workable consistency with BONDCRETE admixture (BONDCRETE 1: WATER 10) in place of normal water. Avoid over troweling, do not over wet the mix.
Is BondCrete a sealer?
bondcrete the proven performer has evolved since 1951 into the most versatile bonding and sealing agent available. bondcrete contains an exclusive resin additive ensuring maximum bonding strength.
Is BondCrete a good sealer?
Universal Bonding Agent It’s so strong there is little need to hack, chip or acid etch the surface before bonding. Bondall BondCrete is an extremely versatile bonding and sealing agent widely used in the building and renovating industry.
How do you use BondCrete tiles?
Can I use BondCrete in grout?
Bondall BondCrete for Tile Grouting Any Bedding Mix or grout containing BondCrete must be cleaned off the face of the tile before it dries. Floor tiles must be applied on full beddings only.