What is the most common scissor lift accident?

1. Touching Power Lines. One of the leading causes of injury and death on aerial and scissor lifts is electrocution from overhead power lines.

What is the OSHA standard for scissor lifts?

OSHA regulations 29 CFR 1926.451(g) and 29 CFR 1910.29(B) require scissor lifts to always be equipped with adequate guardrails that are in place under all conditions. This includes indoor and outdoor construction, water tower repairs, shipyard work – anywhere scissor lifts are used.

At what height is a harness required on a scissor lift?

six feet
OSHA says that any job performed more than six feet off the ground warrants the use of a fall protection system. Even when no harness is required on scissor lift, it’s a good idea to wear one out of caution.

Why do scissor lifts sway?

The higher a platform is raised, the more unstable the lift structure becomes. This increases wobbling caused by movement on the mobile elevating work platform (MEWP). Also, adding weight to a man lift platform increases the risk that the lift will tip over.

Do scissor lifts fail?

If your scissor lift or aerial lift isn’t properly balanced or overloaded, tip-overs can happen. This common aerial lift accident is the root cause of a handful of scissor lift fatalities every year in the United States.

Should you tie off in a scissor lift?

Section 1926.453(b)(2)(v) of the Aerial Lift standard provides that workers in aerial lifts and boom-type platforms must be tied-off. Workers on scissor lifts must either be tied-off or protected by guardrails.

Do you need to wear a safety harness in a scissor lift?

The International Powered Access Federation’s (IPAF) official statement on the use of harness in scissor lifts is as follows, as per the IPAF Operators Safety Guide: ‘It is not normally necessary for personnel working from a vertical lift to wear fall protection equipment, other than in exceptional circumstances.

Do I need to tie off in a scissor lift?

Do you have to wear a hard hat on a scissor lift?

Hard hats must be worn when exposed to overhead hazards. A safe distance from energized power lines shall be maintained. Ladders and other devices shall not be used to increase working heights on lift platforms. Lifts shall not be moved while raised, unless they adhere to the special requirements of the OSHA standard.

How do scissor lifts not tip over?

Preventing tip-overs: best practices Many newer scissor lifts have a power receptacle at the base of the lift for an extension cord. Do not tie them to the lift. Do not place them where they could become cut or abraded. Use caution when raising the platform to avoid tangling them in the moving parts.

How to work with scissor lifts safely?

before working on the scissor lift. • Only stand on the work platform; never stand on the guardrails. • Keep work within easy reach to avoid leaning away from the scissor lift. Work Platform Top Rail Mid Rail. An example of a scissor lift.

What are the safety rules of scissors?

Scissor safety for toddler aged children also includes instruction on proper handling, holding of the scissors, and cutting a straight line. Make a dotted line on paper and encourage your child to align the scissors with it. You may want to hold the paper with both hands and keep it nice and taut so that the cutting goes rather easily.

Why to use a scissor lift?

scissor lift helps to reduce the psychological stress and physical requirements of a worker at an elevated height. Therefore, if a scissor lift is perfectly designed, manufactured, maintained, and properly used, it will increase not only the operators’ productivity but also their safety.

What do you need to know about scissor lifts?

The basics of handling the scissor lift

  • How to spot hazards in the workplace
  • How to identify when the lift needs repairs
  • Weight limits