What is the difference between flush mount and hugger ceiling fans?

Flush mounts anchor the fan directly against the ceiling. Most standard fans can be installed as a flush mount however, many manufacturers sell “hugger” or “low profile” ceiling fans that are specifically designed for this purpose.

How low do ceiling hugger fans hang?

Ceiling fans operate most efficiently when the blades are least 12″ from the ceiling. The blades of a typical ceiling hugger fan are anywhere as close as 10″ to 5.25″ from the ceiling.

What is a hugger fan?

Hugger ceiling fans are defined as ceiling fans that do not include a downrod when mounted to the ceiling, and they are often interchangeably referred to as flush-mount ceiling fans. For this reason they are a great choice for low ceilings or small rooms.

Do hugger fans work?

Blades that are mounted closer to the ceiling reduce air volume, so they won’t provide the same level of breeziness as those that are mounted 8 or more inches below the ceiling. For this reason, hugger fans may work harder than standard mount fans and may be less efficient.

Are flush mount ceiling fans harder to install?

However, in an older home, the ceilings usually aren’t higher than 8 feet, and the rooms are not usually extremely spacious. Because of that, a flush mount fan down rod isn’t necessary, which means one less complicated step in the installation process.

Is an 8 ft ceiling too low for a ceiling fan?

In order for a fan to be considered to be OK to use on an 8 foot ceiling, the bottom of the blades of the fan must be 7 feet off the floor when the fan is installed. The fan bodies themselves may extend slightly below the blades but will not affect the fan’s ability to be mounted on an 8 foot ceiling.

How much space should be between ceiling fan and wall?

18 inches
Keep the distance between the fan blades and the ceiling at the optimum distance of 8-10 inches to ensure efficient circulation of air. Keep the distance between blades and any light fixture at a minimum of 39 inches. Keep the distance between the fan blades and any wall at a minimum of 18 inches.