How much does it cost to change a V-belt?

Table of Contents

A typical serpentine belt start at around $25 and goes up to $75 at most. If you know some car repair basics, you could change the belt yourself, and it may save you paying labor charges somewhere between $75 and $120. All together, you’re looking at around $100 to $195 to replace your serpentine belt.

When should V belts be replaced?

A good rule of thumb is to replace your V-Belt every 30,000 miles, while your serpentine belt and timing belt should be replaced every 50,000, although these numbers vary depending on the make and model of your car. Hoses should typically be replaced every four years.

How do I choose the right V-belt?

Use a cloth measuring tape (not a steel one) and wrap it around the outside of the belt. You also use a thin string to take this measurement and place it on a steel tape to get the correct length. Next, for “A” Belts (1/2” width) subtract two-inches from the outside measurement to select the correct V-belt.

How do I know if my drive belt is bad?

If your serpentine belt is failing, you may notice performance issues with your vehicle. The vehicle may frequently overheat….Bad Serpentine Belts Cause Vehicle Performance Issues

Flickering lights on start up.
Failure to start.
Dimmed headlights.
Continuously illuminated amperage light.

How long does a fan belt last?

Typically, serpentine belts last anywhere from 50,000 to 100,000 miles. Over time, friction and heat break them down.

How long do V belts last?

V-Belts usually should be inspected for wear after 3 years or 30-40,000 miles of use. According to belt manufacturers, failure rates rise sharply after 3 years of service. Replacing V-belts every 3-4 years can minimize the risk of sudden belt failure. Most cars on the road today have only one belt, a serpentine belt.

How many types of V belts are there?

There are three common V belt types: Classical V-belt (classified by their dimensions from A to E), Narrow V series (classified by their dimensions 3V, 5V, and 8V), and light duty Fractional Horsepower belt (classified by their dimensions 2L, 3L, 4L, 5L). Their counterpart cogged belt is classified by the letter X.

How do you size a pulley belt?

How to calculate a belt length?

First, determine the diameter of the larger pulley. Measure the diameter of the larger pulley.
Next, determine the diameter of the smaller pulley. Measure the diameter of the smaller pully.
Next, measure the distance between pulleys.
Finally, calculate the belt length.