How do you make a section cut in SketchUp?
How to Cut a Section on SketchUp
- Open SketchUp and open your drawing.
- Click the “Section Plane” tool from the Guide toolbar or the “Tools” menu.
- Click on a section to cut into it. Press “Esc” to undo the cut.
What are section planes?
Definition of section plane 1 : a surface seen in section (as in cross section) 2 : a hypothetical plane cutting a section.
How do you draw a section?
When sketching an object or part that requires a sectional view, they are drawn by eye at an angle of approximately 45 degrees, and are spaced about 1/8” apart. Since they are used to set off a section, they must be drawn with care. It is best to use the symbol for the material being shown as a section on a sketch.
What is a cut section?
A cut section, sometimes referred to as a “cutting plane”, is a flat plane that cuts through the model. • A cut section may be located anywhere in space and oriented at any angle.
What are the three sectional planes?
There are three basic reference planes used in anatomy: the sagittal plane, the coronal plane, and the transverse plane.
How do you draw a cutting plane?
Cutting plane lines are used to define section views.
- Choose Home tab→Drawing Views group→Cutting Plane .
- Click a part view.
- Draw the cutting plane.
- When you are finished drawing the cutting plane, on the ribbon, click Close Cutting Plane .
- Click to define the section view direction.
How do you draw a section line?
To Draw a Section Line and Marks
- On the default tool palette set, click the Design tab, and then click the Vertical Section tool.
- Specify the start point of the section line.
- Continue to specify points to define the section line, if needed.
- Specify the endpoint of the section line, and press Enter.