How much is a heater core for a 98 Dodge Ram?

The average cost for a Dodge Ram 1500 heater core replacement is between $1,017 and $1,181. Labor costs are estimated between $537 and $678 while parts are priced between $480 and $503.

Where is the heater core located on a Dodge Ram 1500?

The heater core of the Dodge Ram 1500 is contained within the dashboard of the truck. In order to access and remove the heater core, the dashboard must be partially dismantled.

How do you know your heater core is bad?

Five Signs Your Car’s Heater Core Is Going Bad

  1. Fog Inside Your Car. Two things could be going on if you have fog inside your car.
  2. Sweet Smells in the Car. The sweet smell in your car might not be your perfume or the donuts you’re taking to work.
  3. Constant Engine Coolant Loss.
  4. Cold Air in the Cabin.
  5. Cold Cabin/Hot Engine.

Where is a heater core located?

A heater core is a small radiator located under the dashboard of the vehicle, and it consists of conductive aluminium or brass tubing with cooling fins to increase surface area.

How can I tell if my heater core is clogged?

A good test to see if your heater core is clogged is to feel the hoses going into it in the firewall. Look at the firewall or bulkhead for two hoses close together. These are normally the feed and return hoses for the heater core. With the engine warm and running, feel the hoses.

Can I replace my heater core myself?

Before installing a new heater core, transfer any parts from the old heater core to the new one. Install the new core, reinstall or replace the mounting clamps and then the hoses as well as the heater drain tube. Once the heater core, clamps, hoses and tube are secure, you’re ready to add new coolant to the radiator.

How to remove and replace heater core?

Raise the car’s rear end and secure it on jack stands.

  • Disconnect the drain tube from the heater case and the heater hoses from the core,loosening their clamps with pliers where needed.
  • Lower the car off the jack stands.
  • Remove the floor air outlet duct to access the heater core case. Unscrew and remove the heater core cover.
  • How do I replace the heater core?

    How to Replace Your Heater Core. First remove all the water from your system by draining the radiator, it’s best to do it this way so you can add new coolant and keep the mess to a minimum, after your water is drained, go ahead and remove the heater core feed lines. Remove top of dash pad, do this by removing several screws located under the

    Should I replace my heater core?

    Take care not to damage outlet port or you will have to replace the whole heater core. If the hose is old and caked onto the outlet port, you may have to replace the hose as removing it will likely damage the seal. Liquid will most likely come out as well so have the rags ready to clean up any spilled coolant.

    How to fix a plugged heater core?

    Rust/Scale Build-Up. Corrosion of any type is extremely detrimental to a vehicle’s cooling system as a whole.

  • Mixing of Oil/Coolant. When oil and coolant mix,sludge is created as a byproduct.
  • Use of a Stop Leak Product. Many vehicle owners choose to use various stop leak products to eliminate cooling system leaks of one type or another.