What is the working principle of Slotter machine?
Working principle of slotting machine is very simple. In the slotting machine, work item is placed in a vertical position on the bed. And then cutting tools move in reciprocating action to perform the operation and shed the additional material from the work item.
How many operations can a slotter machine perform?
Slotter Machine: Types, Parts and 4 Different Types of Operations.
Which Slotter is a lighter machine and is operated at high speeds?
Different types of slotting machines are: 1. Punch slotter: a heavy duty rigid machine designed for removing large amount of metal from large forgings or castings 2. Tool room slotter: a heavy machine which is designed to operate at high speeds. This machine takes light cuts and gives accurate finishing.
What is Slotter machine?
A slotter machine is one the oldest machine tool that exist, which was invented for BRUNEL. It is much similar to the vertical shaper machines as the ram carrying the slotting tool reciprocates in a vertical guide-way of the machine. This machine can produce flat and contour surfaces, slots and internal grooves.
What are the applications of Slotter?
These are the applications of a Slotter Machine:
- It is used for cutting Slots, Spline and Keyways, both internal and external.
- It is also used for the Machining of internal and external gears.
- Internal machining of blind holes.
- It is used for light cuts.
Which one of the following operations can be performed on a slotter machine?
Explanation: Internal grooving operations can be done on slotting machine.
Which type of mechanism is used in Slotter machine?
A slotter machine is a machine tool that works on the principle of a quick return mechanism to cut metals from a workpiece. It cuts metals only in the forward stroke only.
What is the difference between shaper and slotter?
Shaper is commonly used to make flat surfaces. Slotter is use for cutting groove, keyways and slots on inside and outside surface.
What angle is Slotter tool?
The clearance angle (COG in Figure 17-10) should be 4° or 5°, and the rake angle (BOF in Figure 17-10) should be 10° or 12°. When the cutting tool is clamped to the end of the ram in a horizontal position, the clearance and rake angles are measured in the same manner as for planer tools.
Which angle is provided in Slotter tool?
Which of the following operations Cannot be performed on Slotter?
Explanation: Square thread cutting operations cannot be performed on slotter.
How many types of shapers are there?
Various types of shaping machines are classified into four such as motion type (driving mechanism), ram travel, table design, and the type of cutting stroke: Types of shaper machine base on driving mechanism: Crank type e.g. quick return motion mechanism. Geared shaper type.
What is the working of the Slotter machine?
The working of the slotter machine is the same as that of the shaper machine but the difference is that shaper cuts the metal horizontally and slotter cuts the metal vertically. Let’s try to understand the working of the slotter machine in detail:
What are the disadvantages of Slotter machinis?
The disadvantages of Slotter Machinis that The worker should have knowledge of machine to operate and second one is the machine construction is not simple.
What is the saddle on a slotter machine?
The saddle is mounted on the base of the slotter machine and it is used to give longitudinal feed to the table. In other words, it allows the table to move towards and away from the column. 4. Cross Slide.
What is a tool room Slotter?
The tool room slotter works with good machine speed and produces an accurate surface finish. This type of slotter is used for machining tapered jobs by ram swivel to 10 to 30 degrees. This type of slotter machines offer a high volume of production at low cost, also it gives greater accuracy too.