What is C-clip used for?
Circlips are small, semi-flexible metal rings. They are a type of fastener and are also known as C-clips, Seeger rings, snap rings or Jesus clips. They’re most commonly used in machine grooves, where their key job is to hold dowel pins securely in place.
What tool removes circlips?
Although circlip pliers are specially designed to make removing and installing circlips easy and safe, there are other tools which some people choose to use. Circlip pliers are especially useful if you work regularly with circlips; however if you will only use them a few times they may be an unnecessary cost.
What are C clips called?
circlip
A circlip (a portmanteau of “circle” and “clip”), also known as a C-clip, Rotor Clip, snap ring or Jesus clip, is a type of fastener or retaining ring consisting of a semi-flexible metal ring with open ends which can be snapped into place, into a machined groove on a dowel pin or other part to permit rotation but to …
How do you remove large C clips?
The easiest way to remove a c-clip is with a small flat head screwdirver. Put your finger on top then push the blade in between the the top of the c-clip and the shaft. Then turn the screwdriver 45 degrees to pry it up. Your finger will stop it from flying away.
Why are circlips used?
Circlips are used to prevent lateral movement. They are used as retaining rings on bearing assemblies and are manufactured using semi-flexible metal ring. These products are in a shape of a circle with a clip and are open from one end. The most common form of axially fitted circlips for shafts with grooves.
What are circlips made of?
The standard material for circlips, with the exception of smaller external types which are made from Beryllium copper, is carbon spring steel. Other materials are available on request including stainless steel (DIN 1.4122), phosphor bronze and beryllium copper.
Where are circlips used?
Circlips are used to prevent lateral movement. They are used as retaining rings on bearing assemblies and are manufactured using semi-flexible metal ring. These products are in a shape of a circle with a clip and are open from one end.
What are the types and applications of circlips?
Basic Types of Circlips
- External Circlip Standard. Conforms to BS3673 Part 4, the most common form of axial retainer for shafts with grooves.
- External Circlip Lugged.
- Internal Circlip Standard.
- Internal Circlip Lugged.
- E Type External Circlip.
- Snap Rings.